Home > OxyDew – Koffer

OxyDew - Koffer

Oxygenmeasurement in a portable case

This Model was made for fast, accurate and economic measurement of Oxygen at trace levels.
A simple menu-driven software, touchpad and large LCD-display allow easy and fast start-up of the instrument.
The Unit is measuring Oxygen between 0 – 10000 ppm.
A High Quality aluminium case is protecting the measuring equipment during the transport.

Parameters Oxygen ppm
Dewpoint °C
Method

Electro Chemical
Al2O3/ Crystalline

ATEX Nein
SIL Nein
Range

0 – 10.000 ppm
0 – 10 ppm
freely programmable

Accuracy

+/- 2 % FSD

Response time T 90

0 – 10 ppm 60s

Output

4 – 20 mA
RS232
Datalogger

Supply Voltage

85 – 230 V

User-selectable measuring range

The user can select any range within the 0 – 10000 ppm.
Free-programmable concentration alarm and a system alarm give versatility meeting almost any requirement.

 

Data outputs and Data Logger

For the Oxygen 4-20 mA output standard available. A Data Logger with 10000 Readings and a RS 232 is standard.

 

Sensor with long operating life

The Oxymaster uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life. To measuring the Dewpoint, the unit use an Aluminiumoxidprobe.

 

Calibration

The calibration of the instrument for trace oxygen measurements in gas should be done with a calibration gas. The concentration can be chosen
freely within the measuring range.

 

Benefits

  • Compact economic instrument with sensor separate from the electronics
  • Sensor with long operating life.
  • No range switching required Instructions and error messages in normal text (e.g. calibration not OK, change measuring cell)
  • Sample system with filter, flowmeter and shut off valves

 

Flow-through measuring cell in Stainless Steel

  • The measuring cell is modular and is made of stainless steel
  • A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit
Parameters Oxygen ppm
Dewpoint °C
Method

Electro Chemical
Al2O3/ Crystalline

Range

0 – 10.000 ppm
0 – 10 ppm
freely programmable

ATEX Nein
SIL Nein
Accuracy

+/- 2 % FSD

Resolution

0,1 ppm
0,1 °C

Flow rate ca. 1 l/m
Pressure 0,1 – 1 bar
Calibration

Calibration Gas

Response time T 90

0 – 10 ppm 60s

Gas temperature 0 – 50 °C
Output

4 – 20 mA
RS232
Datalogger

Supply Voltage

85 – 230 V

Display

Graphic Display

Protection Class IP 65
Connection 6 mm
Dimensions 220 x 190 x 190
Weight 5 Kg
  • Variety of sensors available or can be used
  • User programmable measuring range
  • Output signal: 4-20 mA for O2
  • Self-diagnosis
  • Clear text graphic display
  • Data tracking, temperature reading
  • SS316 measuring cell
  • Instructions and error messages in normal text
  • universal Power supply 85 – 230 VAC 50 – 60 Hz
  • Data Logger with 10000 Readings and programmable Interval
  • Semi conductor industry
  • Gas manufacturers
  • Metallurgical industries
  • Chemical industry

Kontaktieren Sie uns

Contact Us