Home > Oxymaster II 16TD

Oxymaster II 16TD

Oxygen- and Humiditymeasurement in one unit

This Model was made for fast, accurate and economic measurement of Oxygen and Dewpoint at trace levels.
A simple menu-driven software, touchpad and large LCD-display allow easy and fast start-up of the instrument.
The Unit is measuring simultan Dew points between -100°C und+20°C and Oxygen between 0 – 10000 ppm.

Parameters Oxygen ppm
Moisture ppm
Dewpoint °C
Method

Electro chemical

ATEX No
SIL No
Range

0 – 10.000 ppm
0 – 10 ppm
freely programmable

Accuracy

+/- 2 % FSD

Response time T 90

0 – 10 ppm 60s

Output

4 – 20 mA
RS232
Alarm
Datalogger

Supply Voltage

85 – 230 V

  • Description
  • Specifications
  • Standard Features
  • Application Areas
  • Inquiry

User-selectable measuring range

The user can select any range within the 0 – 10000 ppm and -100°C – +20°C dewpoint.
Free-programmable concentration alarm and a system alarm give versatility meeting almost any requirement.

 

Data outputs

For the Oxygen concentration and the Dewpoint are 2 x 4-20 mA output standard available. Other outputs are available on request. RS485 is an option.

 

Sensor with long operating life

The Oxymaster uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life.
To measuring the Dewpoint, the unit use an Aluminiumoxid probe.

 

Calibration

The calibration of the instrument for trace oxygen
measurements in gas, should be done with a
calibration gas. The concentration can be chosen
freely within the measuring range.

 

Benefits

  • Compact economic instrument with sensor separate from the electronics
  • Sensor with long operating life.
  • No range switching required Instructions and error messages in normal text (eg calibration not OK, change measuring cell)

 

Flow-through measuring cell in Stainless Steel

  • The measuring cell is modular and is made of stainless steel
  • A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit
Parameters Oxygen ppm
Moisture ppm
Dewpoint °C
Method

Electro chemical

Range

0 - 10.000 ppm
0 - 10 ppm
freely programmable

ATEX No
SIL No
Accuracy

+/- 2 % FSD

Resolution

0,1 ppm
0,01 ppm

Flow rate ca. 1 l/m
Pressure 0,1 - 1 bar
Calibration

Air
Calibration Gas

Response time T 90

0 - 10 ppm 60s

Gas temperature 0 - 50 °C
Output

4 - 20 mA
RS232
Alarm
Datalogger

Supply Voltage

85 - 230 V

Display

Graphic display

Protection Class IP 65
Connection 6 mm
Dimensions 220 x 190 x 190
Weight 3 Kg
  • Variety of sensors available or can be used
  • User programmable measuring range
  • Output signal: 4-20 mA for O2
  • Output signal: 4-20 mA for Dewpoint
  • Self-diagnosis
  • Clear text graphic display
  • Data tracking, temperature reading
  • SS316 measuring cell
  • Instructions and error messages in normal text
  • universal Power supply 85 – 230 VAC 50 – 60 Hz
  • 24 VDC / ca. 50 Watt
  • Semiconductor industry
  • Gas manufacturers
  • Metallurgical industries
  • Chemical industry

Kontaktieren Sie uns