Home > OxyP % – H₂

OxyP % - H₂

portable Oxygen & Hydrogen measurement for % Range

This Model was made for fast, accurate and economic measurement of Oxygen and hydrogen at percent levels.
A simple operating and a large LCD-display allow easy and fast start-up of the instrument.
The Unit is measuring Oxygen between 0 -25% and hydrogen between 0 – 10%.

Parameters Oxygen %
Hydrogen %
Method

Electro chemical

ATEX No
SIL No
Range

0 – 1 % H2
0 – 25 % O2
Spezial Range

Accuracy

+/- 2 % FSD

Response time T 90

0 – 10 % 30s

Output

4 – 20 mA
Datalogger ( optional )

Supply Voltage

85 – 230 V
Akku

  • Description
  • Specifications
  • Standard Features
  • Application Areas
  • Inquiry

Measuring range

The user get a range of 0 – 25% of oxygen and 0-10% hydrogen.

 

Data outputs

For the Oxygen and Hydrogen concentration are two 4-20 mA output available.

 

Sensor with long operating life

The Oxymaster uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life.

 

Calibration

The calibration of the instrument for trace oxygen measurements in gas should be done with a calibration gas. The concentration can be chosen
freely within the measuring range.

 

Benefits

  • Compact economic instrument
  • Sensor with long operating life.
  • No range switching required
  • optional with gas sampling pump or flow meter
  • rechargeable Battery

 

Flow-through measuring cell

  • The measuring cell is modular
  • A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit
Parameters Oxygen %
Hydrogen %
Method

Electro chemical

Range

0 - 1 % H2
0 - 25 % O2
Spezial Range

ATEX No
SIL No
Accuracy

+/- 2 % FSD

Resolution

0,01 %

Flow rate ca. 1 l/m
Pressure 0,1 - 1 bar
Calibration

Air
Calibration Gas

Response time T 90

0 - 10 % 30s

Gas temperature 0 - 50 °C
Output

4 - 20 mA
Datalogger ( optional )

Supply Voltage

85 - 230 V
Akku

Display

2x LCD 6 Digits
Bargraph Display

Protection Class IP 65
Connection 6 mm
Dimensions 240 x 160 x 130
Weight 2 Kg
  • Variety of sensors available or can be used
  • Output signal: 4-20 mA for H2 andO2
  • Data tracking optional
  • universal Power supply for charging 85 – 230 VAC 50 – 60 Hz
  • battery powered
  • Gas manufacturers
  • electrolysers

Kontaktieren Sie uns