Home > OxyP T

OxyP T

portable Oxygenmeasurement for trace and % range

This Model was made for fast, accurate and economic measurement of Oxygen at trace or percent levels.
A simple operating and a large LCD-display allow easy and fast start-up of the instrument.
The Unit is measuring Oxygen between 0 – 10000 ppm or 0 -25%.

Parameters Oxygen ppm
Oxygen %
Method

Electro chemical

ATEX No
SIL No
Range

0 – 10.000 ppm
0 – 1.000 ppm
0 – 100 ppm
0 – 10 ppm
switchable

Accuracy

+/- 2 % FSD

Response time T 90

0 – 10 ppm 45s

Output

4 – 20 mA
Datalogger ( optional )

Supply Voltage

85 – 230 V
Akku

  • Description
  • Specifications
  • Standard Features
  • Application Areas
  • Inquiry

Measuring range

The user get a range of 0 – 10, 0-100, 0-1000 and 0-10000 ppm or 0 – 25% of oxygen.

 

Data outputs

For the Oxygen concentration there is a 4-20 mA output standard available.

 

Sensor with long operating life

The Oxymaster uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life.

 

Calibration

The calibration of the instrument for trace oxygen measurements in gas should be done with a calibration gas. The concentration can be chosen
freely within the measuring range.

 

Benefits

  • Compact economic instrument
  • Sensor with long operating life.
  • No range switching required
  • optional with gas sampling pump or flow meter
  • rechargeable Battery

 

Flow-through measuring cell in Stainless Steel

  • The measuring cell is modular and is made of stainless steel
  • A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit
Parameters Oxygen ppm
Oxygen %
Method

Electro chemical

Range

0 - 10.000 ppm
0 - 1.000 ppm
0 - 100 ppm
0 - 10 ppm
switchable

ATEX No
SIL No
Accuracy

+/- 2 % FSD

Resolution

0,1 ppm

Flow rate ca. 1 l/m
Pressure 0,1 - 1 bar
Calibration

Calibration Gas

Response time T 90

0 - 10 ppm 45s

Gas temperature 0 - 50 °C
Output

4 - 20 mA
Datalogger ( optional )

Supply Voltage

85 - 230 V
Akku

Display

LCD 6 Digits
Bargraph Display

Protection Class IP 65
Connection 6 mm
Dimensions 240 x 160 x 130
Weight 2 Kg
  • Variety of sensors available or can be used
  • Output signal: 4-20 mA for O2
  • Data tracking,
  • SS316 measuring cell
  • universal Power supply for charging 85 – 230 VAC 50 – 60 Hz
  • battery powered
  • Semi conductor industry
  • Gas manufacturers
  • Metallurgical industries
  • Chemical industry

Kontaktieren Sie uns