This Model was made for fast, accurate and economic measurement of Oxygen at trace or percent levels.
A simple operating and a large LCD-display allow easy and fast start-up of the instrument.
The Unit is measuring Oxygen between 0 – 10000 ppm or 0 -25%.
Parameters | Oxygen % |
Method | Electro chemical |
ATEX | Nein |
SIL | Nein |
Range | 0 – 100 % |
Accuracy | +/- 2 % FSD |
Response time T 90 | 0 – 10 % 30s |
Output | 4 – 20 mA |
Supply Voltage | 85 – 230 V |
Measuring range
The user get a range of 0 – 25% of oxygen
Data outputs
For the Oxygen concentration there is a 4-20 mA output standard available.
Sensor with long operating life
The Oxymaster uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life.
Calibration
The calibration of the instrument for trace oxygen measurements in gas should be done with a calibration gas. The concentration can be chosen
freely within the measuring range.
Benefits
Flow-through measuring cell in Stainless Steel
Parameters | Oxygen % |
Method | Electro chemical |
Range | 0 – 100 % |
ATEX | Nein |
SIL | Nein |
Accuracy | +/- 2 % FSD |
Resolution | 0,01 % |
Flow rate | ca. 1 l/m |
Pressure | 0,1 – 1 bar |
Calibration | Air |
Response time T 90 | 0 – 10 % 30s |
Gas temperature | 0 – 50 °C |
Output | 4 – 20 mA |
Supply Voltage | 85 – 230 V |
Display | LCD 6 Digits |
Protection Class | IP 65 |
Connection | 6 mm |
Dimensions | 240 x 160 x 130 |
Weight | 2 Kg |
Your satisfaction is our top priority. That is why we have made it our mission to offer our customers a comprehensive portfolio. We are happy to conduct detailed consulting and coordination discussions in order to find optimal solutions for your concerns together in cooperation with you. Through our years of experience in gas analysis and moisture measurement we are your ideal partner.