Home > OxyTrans I

OxyTrans I

Loop Powered two wire Oxygen Transmitter

The Model OxyTrans is simple, accurate and economic measurement of  Oxygen at trace and % levels. A simple Display and one point calibration allow easy and fast start-up of the instrument.

optional 1/2 G Ex ia IIC T4 (ATEX)

Parameters Oxygen %
Oxygen ppm
Method

electro chemical

ATEX Yes
SIL Yes
Range

0 – 100 %
0 – 10.000 ppm
0 – 10 ppm
special Range

Accuracy

+/- 2 % FSD

Response time T 90

0 – 10 ppm = 45s
0 – 100 ppm = 20s

Output

4 – 20 mA
2-Wire

Supply Voltage

10 – 35V

  • Description
  • Specifications
  • Standard Features
  • Application Areas
  • Inquiry

One User specific measuring range The unit will offer with ranges between 0-10 ppm and 0 – 100% of oxygen.   Sensor The OxyTrans uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life.   Calibration The calibration of the instrument for trace oxygen measurements in gas, should be done with a calibration gas. The concentration can be chosen freely within the measuring range. In the percent range the unit can calibrated with air.   Features

  • compact
  • inexpensive
  • Sensor with long operating life
  • IP65 enclosure
  • reverse voltage protection and temperature
  • temperatur compensation

  Flow-through measuring cell in Stainless Steel

  • The measuring cell is modular and is made of stainless steel
  • A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit
Parameters Oxygen %
Oxygen ppm
Method

electro chemical

Range

0 - 100 %
0 - 10.000 ppm
0 - 10 ppm
special Range

ATEX Yes
SIL Yes
Accuracy

+/- 2 % FSD

Resolution

0,1 ppm
0,01 ppm

Flow rate ca. 1 l/m
Pressure 0,1 - 1 bar
Calibration

Air
Calibration Gas

Response time T 90

0 - 10 ppm = 45s
0 - 100 ppm = 20s

Gas temperature 0 - 50 °C
Output

4 - 20 mA
2-Wire

Supply Voltage

10 - 35V

Display

LCD 6 Digits
Bargraph display

Protection Class IP 65
Connection 6 mm
Dimensions 120 x 160 x 65
Weight 2 Kg
  • different sensors available
  • 5 different Measuring ranges
  • 316 SS Stainless steel Cell block
  • optional Sensor housing with KF40 tri clamp
  • Semi conductor industry
  • Gas manufacturers’
  • Metallurgical industries
  • Chemical industry
  • heat treating and bright annealing

Kontaktieren Sie uns